L&W BREATHING AIR MONITORING
PURACON MOBILE
Puracon Mobil is used for manual humidity monitoring during filling procedures or to check the equipment before diving.
Puracon Mobil M200 / M300 is used for humidity monitoring during filling procedures or to check the equipment before diving. The humidity value can be controlled during the entire filling procedure. Exceeding of the limits will be indicated by a red LED. The Puracon Mobil M200 / M300 can be connected directly between cylinder and filling hose (no installation work on the compressor required).
- M200: 150 to 250 bar
- M300: 250 to 350 bar.
- Auto shut down (battery saving mode)
- Pressure compensation
- Higher accuracy by new temperature compensation
- Applicable without installation work on the compressor
- Storage of max. humidity value
- Alarm LED – freely adjustable limit
- Humidity checks of filled tanks possible
| Puracon Mobil | |
| Humidity: | 5 – 99 mg/m³ |
| Pressure: | M 200: 150 – 250 bar / M 300: 250 – 350 bar |
| Puracon Mobil | M 200 | M 300 |
|---|---|---|
| Operating pressure: | 150 to 250 bar | 250 to 350 bar |
| Power supply: | 2 x AAA LR03 alk. battery | 2 x AAA LR03 alk. battery |
| Connector: | DIN 200 (G5/8) | DIN 300 (G5/8) |
| Protection rating: | IP64 | IP64 |
| Operating temperature: | +5°C to +45°C | +5°C to +45°C |
| Dimensions: | 60 x 90 x 40 mm | 60 x 90 x 40 mm |
Puracon Mobil BA
The new Puracon Mobile BA is the professional solution for mobile monitoring of Humidity + CO + CO2 + O2 and VOC* (Oil).
The new Puracon Mobil BA is the professional solution for mobile monitoring of air quality according to the European standard EN 12021-2014. The system determines the moisture, CO, CO2, O2 and VOC * (Oil) content in the compressed air within a few minutes.
Display and sensor system have been combined to a very compact and handy device, which replaces the conventional and laborious test method of using test tubes. The system is connected between the filling connection and the bottle to be filled, the determined values are displayed clearly in the illuminated display. Air quality checks of already filled bottles can be carried out by using the high pressure throttle valve.
The Aerator unit of the Puracon Mobil BA enables the measuring of CO, CO2 and O2 concentration in the ambient air.
- High quality aluminum housing
- Digital LCD display incl. warning LED (red / green)
- Pressure / temperature compensation
- Pressure reducer including throttle valve
- Adapter DIN 200 / DIN 300
- Filling connector DIN 200 / DIN 300
- High pressure throttle valve
- Assembly tools
- Power cable (length 1.2 m) with 230V plug
- Calibration unit consisting of:
– Aerator unit incl. activated carbon filter
– Pressure regulator with control valve including teflon hose
| Puracon Mobil BA | |
| Humidity: | 5 – 120 mg/m³ |
| CO: | 0 – 30 ppm |
| CO2: | 0 – 3000 ppm |
| O2: | 0% – 25% |
| Oil: | 0.05 – 0.5 mg/m³ |
| Pressure: | max. 350 bar |
| Puracon Mobil BA | |
|---|---|
| Medium: | Breathing air |
| Power supply: | 100 – 240 V |
| Connector: | DIN 200 / DIN 300 (5/8“) |
| Protection class: | IP 50 |
| Operating temperature: | +5°C to +35°C |
| Dimensions: | 175 x 120 x 55 mm |
| Weight: | 1.3 kg |
* VOC = (volatile organic compounds) Sensor for oil vapors and other air polutions such as Hydrogen H, Hydrosulfide H2S,
Ammonium NH4, Ethanol C2H6O, Toluene C7H8.
Puracon Stationary ECO
Puracon Stationary ECO is a cost-efficient solution for humidity monitoring during the filling procedure.
Puracon Stationary ECO is a cost-efficient solution for humidity monitoring during the filling procedure.The Puracon Stationary ECO can be connected directly to the high-pressure line after the humidity filter. The humidity value can be observed during the entire filling procedure. Exceeding of the limits will be indicated by a red LED.
- Adjustable measuring speed
- Auto shut down (battery saving mode)
- Pressure compensation
- Higher accuracy by new temperature compensation
- Storage of max. humidity value
- Alarm LED – freely adjustable limit
Puracon Stationary ECO | |
|---|---|
| Humidity: | 0 – 99 mg/m³ |
| Pressure: | 150 – 350 bar |
Puracon Stationary ECO | |
|---|---|
| Operating pressure: | 150 to 350 bar – adjustable pressure range |
| Power supply: | 2 x AAA LR03 alk. battery |
| Connector: | G1/4 thread |
| Protection rating: | IP64 |
| Operating temperature: | +5°C to +45°C |
| Dimensions: | 60 x 90 x 40 mm |
Puracon Stationary PRO
Puracon Stationary PRO is the professional solution for humidity monitoring during the filling procedure.
Puracon Stationary PRO is the professional solution for humidity monitoring during the filling procedure. The PRO version provides separated sensor and display unit. The sensor is connected directly to the high-pressure line after the humidity filter and is linked to the display unit via a data cable.
- Aluminum sensor housing with G¼“ inlet and outlet
- Display unit (Ø 96 x 37 mm) for wall mounting with sensor cable (length: 2 m)
- Power supply cable (length: 1.7 m) with CE plug 100 – 230 V ~ 50/60Hz
- Digital LCD display with humidity display in mg/m³ and error warnings
- Higher accuracy by new temperature and pressure compensation
- 2 monitoring LEDs, adjustable limits
- 2 output signals (24V)
- Sensor cables with 5, 10, 15 or 30 m available for surcharge
- Approved up to 350 bar
- 420 bar sensor (stainless steel)
- 12 V DC
- 24 V DC
- Eex with ATEX certification
Puracon Stationary PRO | |
|---|---|
| Humidity: | 5 – 50 mg/m³ |
| Pressure: | 150 – 350 bar |
Puracon Stationary PRO | |
|---|---|
| Operating pressure: | 150 – 350 bar / optional 420 bar |
| Power supply: | 100 – 240 V / optional 12V or 24VDC |
| Connector Sensor: | G1/4 thread |
| Protection rating: | IP64 |
| Operating temperature: | +5°C to +45°C |
Puracon Stationary PRO CO/CO2
The new Puracon Stationary PRO CO/CO2 is the professional solution for continuous monitoring of humidity + CO + CO2 during the filling process of breathing air.
- Switch box for wall mounting
- Large LCD display unit Ø = 96 mm
- Power cord (length 1.2 m) with CE plug 230 V AC
- Digital LCD display in ppm%, mg / m³ and bar
- Pressure / Temperature compensation
- Red Alarm LED
- Green Operation LED
- Pressure reducer including throttle valve
- Gas flow regulator
- Max. pressure: 350 bar (Optional 420 bar)
- Including humidification line
- Shut down relay
- Additional remote display incl. cable
- 420 bar Version
Puracon Stationary PRO CO/CO2 | |
|---|---|
| Humidity: | 5 – 120 mg/m³ |
| CO: | 0 – 30 ppm |
| CO2: | 0 – 3000 ppm |
| Pressure: | max. 350 bar |
Puracon Stationary PRO CO/CO2 | |
|---|---|
| Operating pressure: | 350 bar (Optional 420 bar) |
| Power supply: | 100 – 240 V |
| Connector: | Inlet: 8L / Outlet: 8L |
| Protection rating: | IP 54 |
| Operating temperature: | +5°C to +45°C |
| Dimensions: | 300 x 400 x 155 mm |
Puracon Premium
In accordance with EN 12021, all relevant components of the compressed breathing air such as humidity, CO, CO2, O2 and VOC are monitored for the safety of the system operator. The measured values can be called up worldwide on Windows-based devices and allow recording of 32,000 data units per second, minute, hour or day in real time. Location independent remote maintenance, adjustments, as well as the graphical representation of all intake and compressed gas readings are continuously available. The data will be saved on the unit, can be downloaded via USB and other storage media or can be sent directly via email. The sensor circuit board can be easily calibrated by exchanging.
- Wall-mount control box
- Mini-PC with display and storage of all relevant data
- Display of the measured values in ppm, %, mg/m³, bar and °C
- Pressure / temperature compensation
- Green operation LED / red alarm LED
- Pressure reducer including throttle valve
- Signal output for compressor shutdown
- Flushing function to eject non-standard air during compressor start-up
- Integrated ventilation unit
- Languages: German / English / French / Italian / Spanish / Chinese / Dutch
- Remote maintenance / settings by L&W after approval
- Remote access via Bluetooth, WIFI or with external software
- Graphic representation of the gas readings (storage of 32,000 data units,display update per sec, min, h or d freely selectable)
- Data backups via USB or as email
- Display of filling time [min]
- Pressure and temperature displays
- Display of certificates, instructions and approvals
- Streaming of the display on e.g. TV devices (up to 50“)
- Additional Puracon software for displaying the data optionally available
VOC = (volatile organic compounds) Sensor for oil vapors and other air pollution such as Hydrogen H, Hydrosulfide H2S, Ammonium NH4, Ethanol C2H6O, Toluene C7H8.
Puracon Premium | |
|---|---|
| Humidity: | 5 – 120 mg/m³ |
| CO: | 0 – 30 ppm |
| CO2: | 0 – 3000 ppm |
| O2: | 0% – 30% |
| VOC: | 0.05 – 0.5 mg/m³ |
| Pressure: | max. 350 bar |
Puracon Premium | |
|---|---|
| Operating pressure: | 350 bar (Optional 420 bar) |
| Power supply: | 100 – 240 V |
| Connector: | Inlet: 8L / Outlet: 8L |
| Protection rating: | IP 54 |
| Operating temperature: | +5°C to +45°C |
| Dimensions: | 400 x 500 x 200 mm |
EN 
TH